Intelligent products play a leading role

Published time: 2016-06-18 Category: Industry News

On June 18th, the 14th China Strait Project Achievement Trading Fair (referred to as "6.18") opened at the Fuzhou Strait International Convention and Exhibition Center, attracting numerous domestic and foreign merchants. The reporter walked into the "Fujian Industrial Museum" and found that there were 8 Quanzhou enterprises among the participating companies, who brought a total of 16 latest products to the exhibition. "CNC generation", "intelligence", "R&D filling the market gap" and other keywords have become the keywords of these exhibited products.

Reporter Huang Wenzhen, Correspondent Cai Xiaojun (text/picture)

The exhibition of 16 products of Quanqi enterprises in the "June 18" Fujian Industry Museum this year focuses on the application of digital control generation intelligent products and new materials. "According to the introduction of the relevant person in charge of the Municipal Commission of Economy and Information Technology, a total of 16 products of 8 enterprises were organized to participate in the exhibition and on-site promotion after being summarized and recommended by the county-level economic and information departments, covering textile machinery, industrial robots, 3D printing materials, Internet intelligent control, health experience all-in-one machine and other fields.

At the exhibition booth of Jinjiang Lida Machinery Co., Ltd., a fully automatic edging machine attracted many customers to stop. A stack of melamine plates were automatically placed into the operation platform by the machine, and after rough and fine grinding, the burrs were cut off and smoothed. Then, they were sent out of the operation platform by a conveyor belt to complete the polishing work.

This product has achieved fully automatic operation in processes such as loading, unloading, and polishing. One worker can operate 3 to 5 machines at the same time, and the daily production capacity of one machine is equivalent to 3 to 4 workers. Lin Qingquan, the person in charge of the exhibition site of the company, told reporters that after a melamine tableware blank is produced, the edges and corners of the tableware are relatively sharp, so these areas need to be smoothed and polished. In the past, workers had to hold these utensils and polish them one by one on the grinding machine, which not only had low efficiency, but also generated dust during the polishing process that could harm workers' health. For products of different specifications, now only the parameters need to be changed on the CNC display screen. After nearly a year of trial, mass production has begun and 20 units have been shipped to Quanzhou, Zhejiang, Jiangsu, Guangdong and other places.

At the booth of Fujian Najin Network Information Technology Co., Ltd., the robot Xiaojin, who was dancing vigorously, attracted the attention and interest of the merchants. This is a service robot launched at this year's company annual meeting, "said Guo Zhiqiang, the product manager of the company. It can dance, sing, exercise, introduce itself, etc. The company is mainly responsible for the development of the internal functional software of the robot. After the product was launched, it has attracted three robot manufacturing companies to cooperate with the company.

It is understood that under the wave of intelligent manufacturing, service robots have a huge potential customer base and market, with an increasing variety of products covering welcome robots, elderly care robots, children's growth robots, etc., and are expected to develop into a large-scale industry.

Beyond the vision of intelligent machine equipment, a smart repair tire rubber developed by Great Wall Rise (Fujian) New Materials Technology Co., Ltd. has also attracted the attention of visitors at the exhibition. This is a new product that was just developed in March this year, "said Huang Changcheng, the president of the company. Through an automatic tire spray machine, the rubber is evenly sprayed on the inner wall surface of the vacuum tire. When the tire is nailed, the rubber can quickly wrap around the external object. After removing the external object, the rubber instantly fills the wound and quickly self repairs, preventing air leakage and ensuring driving safety.

Fill the market gap and seek product innovation

In the products exhibited by Quanzhou enterprises, the reporter observed that under the background of economic downturn and overcapacity in the market, enterprises are increasingly attaching importance to and accelerating the pace of product research and innovation, transforming and breaking through in finding market gaps, leading consumer demand, and improving customer experience.

At the exhibition site, Fujian Jinjiang Juwang Printing and Dyeing Machinery Co., Ltd. launched an "intelligent fabric inspection machine" that caught the attention of reporters. This seemingly traditional fabric inspection machine is equipped with a "machine vision based fabric quality inspection system", which instantly makes traditional fabric inspection machines have a "magnificent turn" and move towards the high-end of products.

Adding intelligent research and development components to traditional fabric inspection machines is a market gap, "said Zhang Jiancheng, the technical director of Xiamen Weixintai Technology Co., Ltd., the company's technical partner. In the past, after the fabric was produced, it mainly relied on visual inspection for defects, which was time-consuming and laborious, and some minor defects were easily overlooked. Based on extensive market research and customized according to customer needs, after more than half a year of research and development, a fabric inspection camera and CNC system have been added to the traditional fabric inspection machine. When the fabric passes through the camera, the image of the fabric will be transmitted to the CNC detection system display screen for analysis. If there are defects, voice reminders will be given, allowing staff to quickly locate the defect points, mark them, and process them in the next process. This mechanical product is customized according to customer needs.

Zhang Jiancheng revealed that the traditional fabric inspection machine is priced at 50000 yuan per unit, while after innovative research and development, the price per unit is 150000 yuan. Although the price has increased, high-end customers are still willing to purchase due to the greatly reduced defect rate and improved product quality, which can meet the production requirements of high-end fabrics. Compared with the input and output, high-end customers are still willing to purchase.

From baby diaper production line to baby waist diaper production line and then to baby pull-up pants production line, Jinjiang Haina Machinery Co., Ltd. continuously innovates in the production line of baby products machinery. The survival strategy of mechanical manufacturers lies in being able to create and lead customer demand, "Huang Caifa, the sales manager of the company, told reporters. The company's fully servo baby pull-up pants production line was born in this way. Originally, diapers had problems such as side leakage, so they developed waist paper diapers. In order to enhance baby comfort, they also developed pull-up pants." We continuously develop mechanical equipment that meets the needs of finished products through consumer experience testing, and thus create the demand for equipment from finished product manufacturers.

School enterprise cooperation has become the norm for enterprises to develop new products

It is worth noting that among the new products exhibited on site, the reporter learned that the model of jointly developing products with universities, research institutes, etc. has become an important way for enterprises to innovate.

The intelligent transmission assembly test bench for engineering machinery showcased this time is a result of cooperation with the Quanzhou Institute of Equipment Manufacturing, Chinese Academy of Sciences, "said Zhan Xiaopeng, Chief Engineer of Fujian Jingong Machinery Co., Ltd. This is also a" CNC Generation "project, which will be completed by the end of August this year. After experiencing the "golden period" of mechanical equipment development, the surplus market stock of traditional products has forced enterprises to increasingly focus on research and innovation.

Prev ： US Secretary of State Kerry receives "Made in Xiamen" robot as a gift

Next ： Nothing